高输出功率小瞬时电流可靠性试验报告仪（耐脉冲可靠性试验报告仪）-（计算出机有效控制）

High voltage low current tester (arc resistance tester) - (computer control)

的产商品各称称：耐电弧试验机

Product name: electric arc resistance tester

物品材质：NDH-A

Product model: NDH - A

提供规定：GB/T 1411-2002《固态隔热产品耐高压得过低电压电弧焊接蓄电池充电的做实验的时候》（符合IEC  61621-1997）及ASTM D495等标淮的的标准设计的生产的，并合适IEC 149、UL 746A等检测方式方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

核心不适用位置及功效：

本校正机是遵循适中用三相电机、电商和挂式电商等企业的安装电工用材料件、光敏树酯胶和电电隔绝层层漆等电电隔绝层层相关板材的耐弧光特性评估，主中用混合物电电隔绝层层相关板材如：材料件、塑料膜、光敏树酯、白云母、淘瓷、玻璃纸、电电隔绝层层油、电电隔绝层层漆、纸壳等媒质的耐弧光特性自测；

本试验报告机由换算机抑制正常运作，能提示 如今研究的情况及研究时，研究结束了之后并上传如今研究数据显示，并可打印纸.标科学实验报告模板。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为横竖成一体节构，下方为运作程序，上端为测试箱。

2 本新产品按照*新智慧调控技艺，经过使用编译程序（IEC或ASTM）可自動实施应力测试，并在电子设备上表现疲劳试验的过程 和数据。

3 **的性能不错，抗电磁波辐射作用强，测试仪定位精更高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 焊弧通断時间误差值：低于 ±10ms

2 调压器存储量：2kVA

3 电机额定功率试验检测交流电压：12.5kV

4 测试直流电压可靠性强，精密度：±3%

5 工作电流设定可靠性强，精密度：±10%  电流值测量方法表面粗糙度：1.5%

6 探针对坯料压力值：（0.5±0.05）N

7 参比电极产品：钨棒

8 金属电极高度：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 选择生态水温：（23±2）℃

10 在使用环保环境温度：（50±5）%

11 24v电源：220V±5%  50Hz  10A

12 经过多次实验发现    具体方法：   标准/美标/10 mA 维持/20 mA 持续/30 mA不间断/40 mA连续不断

13 试验报告系统给出：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 品牌机型：

NDH-A    耐电弧放电校正仪-微机把控

NDH-B    耐脉冲现场实验仪-手触屏管理

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！